RX8

RX8

Functional overview

Sound source
RX8 high-performance dual-frequency loudspeaker system, built-in a 8" bass unit and a 1.7" tweeter unit, provides different audio-frequency for various fixed installation of sound applications. Convenient built-in frequency divider and large horn design can provide precise mode control. The direction of 100° x 100° provides an outstanding coverage angle for many occasions, the maximum sound pressure can reach 127 dB. Because their extended frequency response ranges from 85 Hz to 18 kHz, RX8 can be used as a full-frequency system, and also used as a three-frequency system with REYN AUDIO RS series subwoofer. The shell is made of high-density birch board, the front side is equipped with hard wire mesh and black PCP (polyurea cabinet protection) paint finish. It has the function of anti-impact and anti-weather. The body included a couple of handles, where located at the both side of the loudspeaker. The unit is supported in the middle of the box by a high precision metal material and metal parts, so that the box can be reliably protected. It is equipped with hangers which can be installed horizontally and vertically at multiple angles. It also has rigging which can be supported and suspended at a single point. The connection panel on the back side is embedded and equipped with Speakon NLT4 M socket. RX8 is suitable for theatres, clubs, DISCO PUB, music clubs, performance halls, music bars, high-end KTV, nightclubs, etc.


Features

  • RX8 is a two tone frequency division loudspeaker system with built-in passive voice divider. The B&C HF driver is imported from Italy, used to ensure quality stability and accord with various quality tests. The operating frequencies range from 85Hz to 18kHz, HF driver uses high frequency 1.7-inch vibration film, 100x100 degrees directivity, high frequency remote projection can be strong and penetrating, with high efficiency single 8 inch low sound unit, with excellent remote projection and fax degree.
  • Multi-angle streamlined design is adopted in front of the steel mesh, which can effectively enhance the bearing capacity of the steel mesh to strong sound waves and avoid physical abnormal sounds. The shell is made of high-density birch board and with black PU wear-resistant paint. It has the functions of waterproof, moisture-proof, sun-proof and collision-proof, can perfectly protects the speaker's body. It can cooperate with the exclusive overhang frame to make the installation more fast & convenient, greatly improve work efficiency.
  • RX8 is suitable for theatres, clubs, disco pub, music clubs, performing halls, music bars, high-end KTV, nightclubs, etc. If cooperate with REYN AUDIO RS series subwoofer can become a three tone frequency division system.

Technical & Specification

System data

  • Frequency range:85Hz-18kHz,-3dB (passive crossover)
  • Maximum output sound pressure level:LF:127dB; HF:127dB
  • Sensitivity(1W/1m):LF:97dB; HF:104dB

Loudspeaker data

  • Rated power(AES): LF:250W; HF:50W
  • Music power: LF:500W; HF:100W
  • Nominal impedance:8Ω
  • LF unit: 8"(2"Voice Coil)
  • HF unit: 1.7" (Compression driver )
  • Horizontal spreading angle:100°
  • Vertical spreading angle:100°
  • Connection index: 1+/1-(INPUT),2+/2-(Link)
  • Connectors: 2xNeutrik NL-4MPR

Dimensions / weight

  • Finish material:Black PU abrasive-resistant paint
  • Cabinet dimension(WxHxD)mm: 250x350x250mm
  • Net Weight : 7.5 Kg

Downloads