RX212

RX212

Functional overview

Sound source
RX212 is a high-performance three-frequency loudspeaker which specialized design for fixed installation. RX212, using two symmetrically designed 12-inch low-frequency drivers, equipped with a 8-inch IF driver loaded speaker and a 3-inch compression driver. The innovative loudspeaker design creates remarkable sensitivity for RX212 and achieves excellent performance in the sound range. Advanced bass reflex and ventilation design provides an extended low frequency output with full bandwidth capability. All components are axisymmetrically arranged around the center of the cabinet to produce a completely symmetrical dispersed pattern. RX212 provides 75 degree horizontal diffusion, which matches 40 degree vertical diffusion. Regardless of the stacking of the ground or hoisting , RX212 can provide a satisfactory solution. The shell is made of high-density birch board, the front side is equipped with hard wire mesh and black PCP (polyurea cabinet protection) paint finish. It has the function of anti-impact and anti-weather. The unit is supported in the middle of the box by a high precision metal material and metal parts, so that the box can be reliably protected. M8 threaded parts are provided at the top, bottom and both sides of the box body to connect RX series hangers, which can be installed horizontally and vertically at multiple angles, and also have hangers with single support and suspension. The connection panel on the back side is embedded and equipped with Speakon NLT4 M socket.


Features

  • RX212 is a high-performance three-frequency loudspeaker which specialized design for fixed installation. The B&C HF driver is imported from Italy, used to ensure quality stability and accord with various quality tests. The operating frequencies range from 68Hz to 19kHz, HF driver uses high frequency 3-inch vibration film, the IF driver and bass unit are 8 inches and 12 inches respectively. 75x40 degrees directivity, significant sensitivity and excellence in sound range.
  • Advanced bass reflex and ventilation design provides an extended low frequency output with full bandwidth capability. All components are axisymmetrically arranged around the center of the cabinet to produce a completely symmetrical dispersed pattern.
  • Multi-angle streamlined design is adopted in front of the steel mesh, which can effectively enhance the bearing capacity of the steel mesh to strong sound waves and avoid physical abnormal sounds. The shell is made of high-density birch board and with black PU wear-resistant paint. It has the functions of waterproof, moisture-proof, sun-proof and collision-proof, can perfectly protects the speaker's body. It can cooperate with the exclusive overhang frame to make the installation more fast & convenient, greatly improve work efficiency.
  • RX212 is suitable for theatres, clubs, disco pub, music clubs, performing halls, music bars, high-end KTV, nightclubs, etc.

Technical & Specification

System data

  • Frequency range:68Hz-19kHz,-3dB (passive crossover)
  • Maximum output sound pressure level : LF:141dB; MF:130dB; HF:135dB
  • Sensitivity(1W/1m): LF:106dB; MF:100dB; HF:108.5dB

Loudspeaker data

  • Rated power(AES):LF:800W; MF:250W; HF:110W
  • Program power:LF:1600W; MF:500W; HF:220
  • Nominal impedance:8Ω
  • LF unit: 2*12"(3"Voice Coil)
  • MF unit:8"(2.5"Voice Coil)
  • HF unit: 3" (Compression driver )
  • Horizontal spreading angle: 75°
  • Vertical spreading angle: 40°
  • Connection index:1+/1-(INPUT),2+/2-(Link)
  • Connectors:2xNeutrik NL-4MPR

Dimensions / weight

  • Finish material:Black PU abrasive-resistant paint
  • Cabinet dimension(WxHxD)mm: 766.5x371x518mm
  • Net Weight : 39Kg

Downloads