Functional overview

Sound source
RX14 is a high-performance dual-frequency multi-purpose loudspeaker with independent units , built-in a 14" bass unit and a 3" tweeter unit, Extended frequency response 18 kHz , the direction of 80° x 50° (H x V) provides an outstanding coverage angle for many occasions, the maximum sound pressure can reach 135 dB. It is suitable for speech and music application, can be used as an independent full-scale system or integrated into a larger distributed sound reinforcement environment. It can easily reproduce high-quality music programs with RS series subwoofers. The shell is made of high-density birch board, the front side is equipped with hard wire mesh and black PCP (polyurea cabinet protection) paint finish. It has the function of anti-impact and anti-weather. The body included a couple of handles, where located at the both side of the loudspeaker. The unit is supported in the middle of the box by a high precision metal material and metal parts, so that the box can be reliably protected. M8 threaded parts are provided at the top, bottom and both sides to connect RX series hangers. Equipped with hangers which can be installed horizontally and vertically at multiple angles, while with rigging which can be supported and suspended at a single point. The connection panel on the back side is embedded and equipped with Speakon NLT4 M socket.


  • RX14 is a high performance two tone frequency coaxial loudspeaker, the B&C HF driver is imported from Italy, used to ensure quality stability and accord with various quality tests. Operational frequency is 18 kHz , HF driver uses high frequency 3-inch vibration film, 80x50 degrees directivity, high frequency remote projection can be strong and penetrating, with high efficiency single 14 inch brass unit, with excellent remote projection and fax degree.
  • Multi-angle streamlined design is adopted in front of the steel mesh, which can effectively enhance the bearing capacity of the steel mesh to strong sound waves and avoid physical abnormal sounds. The shell is made of high-density birch board and with black PU wear-resistant paint. It has the functions of waterproof, moisture-proof, sun-proof and collision-proof, can perfectly protects the speaker's body. It can cooperate with the exclusive overhang frame to make the installation more fast & convenient, greatly improve work efficiency.
  • RX14 is suitable for speech and music application. If cooperate with REYN AUDIO RS series subwoofer can become a three tone frequency division system, reproduce high-quality music programs easily.

Technical & Specification

System data

  • Frequency range:50Hz-18kHz,-3dB (passive crossover)
  • Maximum output sound pressure level : LF:133.5dB; HF:135dB
  • Sensitivity(1W/1m):LF:99dB; HF:108.5dB

Loudspeaker data

  • Rated power(AES):LF:700W; HF:110W
  • Program power:LF:1400W; HF:220W
  • Nominal impedance:8Ω
  • LF unit: 14"(3.5"Voice Coil)
  • HF unit: 3" (Compression driver )
  • Horizontal spreading angle: 80°
  • Vertical spreading angle: 50°
  • Connection index:1+/1-(INPUT),2+/2-(Link)
  • Connectors:2xNeutrik NL-4MPR

Dimensions / weight

  • Finish material:Black PU abrasive-resistant paint
  • Cabinet dimension(WxHxD)mm: 393x651.5x414mm
  • Net Weight : 24.7Kg